LEADWOOD / COMPACT EDGE BANDING
450 — Finish straight and bevelled edges.
A compact edge banding solution for furniture panels, with a heated glue pot, pressure rollers and twin trimming motors.
What it can produce
Apply and trim edge tape on straight panel edges or panels already cut to a 45° bevel. This machine does not cut the panel bevel: prepare the panel edge before banding.
Illustrative straight-edge finish, generated for explanation. This is not a test sample from the 450. Share your panel and tape for application confirmation.
Machine and operating details
Front view, supplied machine presentation and operator controls. Temperature and feed controls support setup for the selected panel and edge tape.
Technical specifications
| Model | 450 |
| Application | Straight edges and pre-cut 45° bevel edges |
| Power supply | AC 220 V / 50 Hz |
| Panel thickness | 18–25 mm |
| Edge tape thickness | 1.0 mm |
| Feed speed | 6 m/min |
| Glue pot capacity | 2000 ml |
| Glue pot heating power | 800 W |
| Trimming motors | 2 × 800 W |
| Conveying motor | 120 W |
| Tape feeding motor | 25 W |
| Heat gun | 2000 W |
| Air pressure | 0.4–0.6 MPa |
| Dimensions in supplied specification | 1390 × 510 × 610 mm; confirm installed dimensions with stand |
Contact us to purchase the 450
Share your panel thickness, edge tape size, required output and destination country. Request configuration advice and a quotation.
Chat on WhatsApp Request a quote by email
Shandong Yinmu Machinery Co., Ltd.
WhatsApp: +86 180 7466 7641
Email: leadwoodmachine@gmail.com
