LEADWOOD / BEVEL & STRAIGHT EDGE BANDING
2900 — A clean finish for bevelled edges.
An edge banding machine for bevel and straight panel edges with angle adjustment, milling, gluing, end cutting, trimming and polishing.
What it can produce
The supplied application shows a finished bevelled furniture-panel edge. Discuss your 45° edge or straight-edge requirements, panel material and tape specification to confirm the tooling and setup.
Actual sample image supplied with the product materials. Final finish depends on the panel, tape, adhesive and setup.
Machine views
Supplied photographs show the machine from the front and both end angles. The equipment in these materials is also marked XZF-450.
Designed around the edge-finishing process
The supplied product materials show edge banding, trimming and polishing units, with a separate operator control panel for temperature and process adjustments. Confirm the suitable adhesive, panel material and tooling before production.
Technical specifications
| Product series | 2900 |
| Reference marking in supplied materials | XZF-450 |
| Bevel angle range | 30°–90° |
| Panel thickness in supplied specification | 50 mm; confirm the working range for your setup |
| Feed speed | 0–12 m/min |
| Power supply options | 380 V / 50 Hz or 220 V, confirm configuration |
| Total power | 13 kW |
| Air pressure | 0.5–0.7 MPa |
| Heating power | 2700 W |
| Milling motor | 4000 W |
| Trimming motors | 2 × 2200 W |
| Polishing motors | 2 × 400 W |
| Glue pot capacity | 4000 ml |
| Overall dimensions | 3000 × 750 × 1350 mm |
| Machine weight | 500 kg |
Contact us to purchase the 2900
Share your panel thickness, edge tape size, required output and destination country. Request configuration advice and a quotation.
Chat on WhatsApp Request a quote by email
Shandong Yinmu Machinery Co., Ltd.
WhatsApp: +86 180 7466 7641
Email: leadwoodmachine@gmail.com
